CYKY-BTF-500 is a lab-scale vacuum melt spinning system for preparing amorphous metallic ribbons. In this technique, metal ingots (<50g) are melted via induction heating method and then propelled by over-pressurizing the crucible.
Technical parameters of vacuum melt spinning system:
Features
| The complete system consists of the stainless steel vacuum chamber, vacuum system, induction heating system, rack system and discharging tubular collector. Copper roller linear speed: 5 ~ 60m / S Melting metallic samples: 5g ~ 50g/Per batch Vacuum casting device (not included in standard configuration) |
Power supply | Voltage: AC380V, three-phase Maximum power 15kw (60A air switch required) |
Vacuum chamber & vacuum pump | Vacuum chamber size: Φ 500mm x 400mm L Hinged cavity door with quartz observation window Molecular pump system is installed in the equipment Vacuum: 5 x10E-5 Torr (within 20 minutes) Limiting vacuum 10e-7 Torr (to be baked) |
Induction heater & temp controller | Heating power: 15kw; frequency range: 30 ~ 80kHz Melting sample quantity: 10 - 50g (depending on the material) Accurate temperature control system, B-type thermocouple, 30 temperature rise and fall procedures can be set Temperature control accuracy: + / - 2℃ |
Crucibles | Quartz crucible or BN crucible can be used according to customers' requirements |
Spinning wheel | Standard copper roller cooling without water Linear speed of copper roller: 5 ~ 60m / S Optional: Optional water-cooled copper roller with a maximum sample handling capacity of 500g Optional vacuum casting module |
Optional accessories | Casting accessories (casting, spray casting) can be purchased according to requirements The water cooling system can be customized for the casting copper mold according to the requirements |
Dimension | 2000×1100×1800mm(L×W×H) |
Weight | ~800Kg |
Certificate | CE certification |
Disclaimer: The product introduction content (including product images, product descriptions, technical parameters, etc.) of this site is for reference only. As the update may not be timely, there will be some differences between the content and the actual situation. Please contact our sales staff to confirm. The information provided on this site does not constitute any offer or promise, and the company will periodically improve and modify the website information, without prior notice, please understand.
